Keystone i-Clamp IDC wire connectors
IDC - Insulation Displacement Connectors
Easy to Use
Quick and Reliable connections
Designed to withstand shock & vibration
For use with 10 - 22 AWG Insulated Wires
Splicing wires by using wire nuts and electrical tape is both time consuming and unreliable. The wires need to be cut, stripped, properly twisted and then the wire nut is screwed onto the twisted splice. Most often electrical tape is added to the nut to assure that the nut does not fall off leaving exposed wires. This is a labor intensive, time consuming process. The quality of the connection and time spent making the splice is entirely based on the skill level of the installer. There is no way to visual inspect the splice when using wire nuts and electrical tape..
i-Clamps provide a quick and taper proof connection without the need to strip the wires. The i-Clamp will pierce the insulation and make a reliable contact in one step. Electrical contact is no longer dependent on the expertise of the wiring installer. The connector is permanent and can not be tampered with.
Use T-Series connectors when you want to branch off of a common wire run. Ideal for wiring several fixtures in parallel such as lighting. The connector hinges open to allow the wire run to be ran thru the connector without cutting or stripping the insulation.
Use Two Way Series connectors have a unique dual channel which allows pre-assembly onto a component or fixture. Once installed, the wiring can be completed by simply attaching the wire to the existing wiring.
Use One way series for connecting several lines together. Eliminates twisting wires together and adding correct wire nut and electrical tape. Connection can be inspected because connector is made from translucent polycarbonate.